 |
 |
 |
|
TACWISE GDA64V 15 Gauge Air Angled Nail Gun taking 38-64mm Nails, With a quick release nose gate for clearing nail jams. Hugely popular on site for Joinery this powerful Angled Finish Nailer offers power and versatility.
This Tool is Supplied with a 1 year warranty
This Tool is Supplied with a Carry Case
(This gun is powered by an Air Compressor not included)
Finish Nailer how to load and fire Tacwise GDA64V
Finish nailer fixing spindles on a staircase Tacwise GDA64V
- Depth Adjuster
- 25 - 50mm Nails
- 15 Gauge Nails
This tool is ideal for
Baseboard
Cabinets
Chair Rail
Decorative Trim
Door & Window Casing
Finishing Apps in Construction
Furniture Frames
Hardwood Flooring
Mirror and Picture Frames
Molding
Nailable Plastic Parts
Paneling
Upholstery Trim Panels
Finish and Trim
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Video Description
Hi thanks for visiting and today I’m going to show you a 15 gauge finish nailer, over to the bench and we can see the tool as you can see here’s the tool in question comes with its own carrying case and its developed manufactured by Tacwise as always I’ll give you the model number it can be searched on our site and you can go direct to find technical information and of course purchase online, and the model number for this tool is GDA64V and this is a powerful angled 15 gauge finish nail gun, weight of the tool 1.4 kilograms and its nicely balanced in the hand, now It takes 38mm through to 64mm two and half inch and there’s numerous uses for this. And just to show you some of the features of the tool just bring it to the camera, rubber foot stops bruising on soft woods, spring loaded quick release that can be pulled away any jams quickly cleared bear in mind keep the tool disconnected from the airline, depth adjuster like on many of our tools there’s a wheel there which adjust the length of the safety arm and then conversely adjust depth of the penetration of the pin so it can be wood filled later if you want it indented or you can have it flush with the surface. And this is an angled brad 15 gauge angled, load that into the tool, place into the rear here, slide it along, bring the feeder shoe over and were ready to go. Connect to the airline, as you can see with this angled magazine as apposed to a straight magazine you can get into some tight areas another feature of this type of tool. I’m using soft woods here but again it could be hard woods etc. this particular pin 38mm inch and a half in old money, and there we go firing the pin into the wood nice strong finish, now they are just standing slightly proud on that but if I am to adjust it, and what I want to show you here is the difference when we as you can see there below the surface probably 2 or 3mm below there as apposed to standing proud, but obviously you can adjust that with different materials. Disconnect from the airline, numerous applications for this second fix joinery, Boat Building of course Decking, Display, Shop fitting, Door Frames, Skirting, Exhibition Contractors, Furniture, Cabinet Maker, Kitchens, Bedrooms, Panelling, Pine Furniture, Sheds, Garden Buildings, Tongue and Groove, Wood Frames, Beading etc etc. well there we go 15 gauge angled finish nailer see us on our site www.mytoolkit.co.uk see you again soon and you take care by for now.
|
|
|
|
|
|
|
|
| Accessories For This Product... |
|
|
|
|
